The magic of antiquity: fresco
Features style "Rococo"
Types of fireplaces
The angular fireplace
Public or private fireplace. or why you need lining
Fireplaces with open and closed firebox
Secrets of masonry
Shelter for the basin
The pavilion for the pool
Pavilions of polycarbonate
The advantages of polycarbonate pavilions
Disadvantages polycarbonate pavilions
Pluses polycarbonate pavilions
Blinds-shelters for swimming pools
Color models solutions
Recall that stained glass is traditionally made of colored glass, interconnected legkoplavkim metals (lead) or bulkheads of copper and brass band. Tech compliance Stained Glass is very difficult, so he has not received wide dissemination of.
In recent times, have found a more affordable methods of implementation of stained-glass panel, including the attachment of colored glass with the help of the solution. Under this mode of mounting stained sheet glass intervals between the parts - opaque (as in the classic stained-glass windows of lead tire), reinforcing the color saturation. This applies as stained glass indoors or outdoors.
Before the direct work with glass should prepare cardboard with a picture in color and contour lines, met ink. The colored glass cut rolikovym glass cutter in accordance with the figure on cardboard.
Then, on a transparent sheet of cardboard packs of silica glass and make the "dry" set of stained-glass panel. The colored glass spread in accordance with the sketch. The space between pieces of colored glass fill solution.
The composition of the solution: cement - 1 h "sand - 3 hours, PVA glue - 1 hour Prepared it in a special receptacle.
For convenience, you can take even polyethylene packaging from the shampoo, in which the cork is inserted glass or plastic tube diameter of 4-5 mm.
Before the ice edge of colored glass in the ground connection to the silica glass carefully smeared solution using wooden sticks. After filling the main podsyhaniya done. With such processing solution is not to leak under the colored glass and stained-glass windows produced neat.
The edges of the glass can also be obramleny dark line (solution). In its upper corners tentatively paving steel wire with loops for the suspension of stained-glass panel.
Stained Glass for windows (round and rectangular) were wire loops for the suspension. Light may consist of five parts, which are equipped with metal angles of attachment elements. Stained Glass for doors and windows in the bathroom run on disposal of glass frames, which already is inserted back in finished form.
Making stained glass requires, of course, certain skills, so should begin with simple and small drawings
Stained Glass in the new time
Tech Stained Glass: the new and old
Stained Glass in the interior
The modern interior
Methods of creating stained glass
Stained Glass with their own hands
Stained-glass window of Tiffany
Techniques execution of stained glass
Differences technology Tiffany
The popularity of Tiffany products
Domestic content aquarium
Types of aquariums
Type design aquarium
The aquarium with live plants
Types of aquariums
In the style of "baroque"
Furniture in the style of "Empire"
In the style of "classicism"
In the style of "eclectic"
In the style of "modern"
Interiors "Art Nouveau"
In the style of "constructivism"
In the style of "minimalism"
In the style of "high-tech"
In Egyptian style
The Indian style
The Moroccan interior